-phase line filters fsw www.schurter.com/pg06_ emc products ac filter 2-stage, very high symmetrical and asymmetrical attenuation description - chassis: screw-on mounting, from top - line-filter in standard version, 2 positions, high attenuation - quick connect terminals 6.3 x 0.8 mm or screw terminals - especially effective against asymmetrical interferences in the frequency range from 10khz up to 30mhz approvals - vde license number: 40004673 - ul license number: e72928 characteristics - designed for increased requirements - 2-stage line filter with increased attenuation protection against interference voltage from the mains - especially designed for industrial applications such as: frequency con - verters, stepper motor drives, ups-systems, inverters especially suitable for use in switching power supplies - qualified for use in equipment according iec/en 60950 references general product informatio n weblinks approval s , roh s , china-roh s , mating connector s , e-stor e , distributor-stock-chec k , accessorie s technical data ratings iec 3 - 36 a @ ta 40 c / 250 vac; 50 hz ratings ul/csa 3 - 36 a @ ta 40 c / 125 vac; 60 hz leakage current standard < 0.5 ma (250 v / 60 hz) dielectric strength > 1.7 kvdc between l-n > 2.7 kvdc between l/n-pe test voltage (2 sec) allowable operation temp. -25 c to 100 c climatic category 25/100/21 acc. to iec 60068-1 protection class suitable for appliances with protection class 1 acc. to iec 61140 terminal quick connect terminals 6.3 x 0.8 mm or screw terminals current >24 a requires screw terminals material: housing alu. anodised / stainless steel line filter standard and industrial version, iec 60939, iec 60601-1, ul 1283, ul 544, en 133 200, csa c22.2 no. 8 technical detail s mtbf > 200'000 h acc. to mil-hb-217 f
-phase line filters fsw www.schurter.com/pg06_ emc products dimensions case 48 75 0.3 91 max. 66 max. 51 max. (20) 6.3x0.8 (3.5) 43 max. (12) (27) 5.3 1) 2) 1) line 2) load case 49 75 0.3 91 max. 66 max. 51 max. (20) 6.3x0.8 (3.5) 32 max. (12) (27) 5.3 1) 2) 1) line 2) load case ff with quick connect terminals 143 0.3 58 max. 48 max. 6.1 (32.5) (130) (12) (27) 5.3 0.3 (12) (27) 0.2 (157) 2) 1) 6.3x0.8 (15.5) 1) line 2) load case ff with screw terminals 143 0.3 58 max. 48 max. 6.1 (32.5) (130) (15) (12) (27) 5.3 0.3 (12) (27) 0.2 (156) 2) 1) 164 max. 3) 4) m 4 1) line2) load3) lock-nut do not unscrew4) nut torque 0.85...1 nm, keep lock-nut fastened diagrams standard version 1) 2) 1) line 2) load
-phase line filters fsw www.schurter.com/pg06_ emc products attenuation loss - - - - differential mode _____ common mode standard version 3 a 6 a 10 a 16 a 20 a 24 a 25 a 36 a industrial version 3 a 6 a 10 a variants rated current [a] filter-type leakage cur - rent [ma] terminal l [mh] cx [f] cy [nf] cy [nf] r [m ? ] weight [g] housing order number 3 standard version 0.25 quick connect terminals 2 x 2 0.1 1.5 1 1 157 49 5500.2058 6 standard version 0.25 quick connect terminals 2 x 0.8 0.1 1.5 1 1 159 49 5500.2060 10 standard version 0.25 quick connect terminals 2 x 0.4 0.1 1.5 1 1 159 49 5500.2062 3 industrial version 2.5 quick connect terminals 2 x 2 0.1 22 1 1 157 49 5500.2059 6 industrial version 2.5 quick connect terminals 2 x 0.8 0.1 22 1 1 159 49 5500.2061 10 industrial version 2.5 quick connect terminals 2 x 0.4 0.1 22 1 1 159 49 5500.2063 packaging unit 10 pcs the specifications, descriptions and illustrations indicated in this document are based on current information. all content is subject to modifications and amendments.
|
